<ul>
<li>This Vice is equipped with convenient unigrip mechanism.</li>
<li>Spindle moves inside the hollow hand grip allowing the vice to be used at location away from the table edge.</li>
<li>The 3-Way vice is available with 3 mounting options.</li>
<li>The ability to adjust the vise along these three axes provides greater flexibility and precision in positioning the workpiece for machining.</li>
<li>It allows machinists to accurately align the workpiece with the cutting tool or spindle, ensuring precise drilling, milling, or grinding operations.</li>
</ul> - Garvin Tools

DRILL PRESS VICE 3 WAY - Garvin Tools

Using a three-axis drill press vise requires attention to detail and proper setup to ensure accurate and safe machining operations. Here's a step-by-step guide on how to use a three-axis drill press vise: 
<ol>
<li>
Preparation: 
<ul>
<li>Ensure that your drill press or milling machine is properly set up and secured.</li>
<li>Select the appropriate cutting tool (drill bit, end mill, etc.) for your machining operation.</li>
<li>Prepare the workpiece by deburring edges and ensuring it is clean and free of any contaminants. </li>
</ul>
</li>
<li>
Mounting the Vise: 
<ul>
<li>Place the three-axis drill press vise on the machine table or workbench where it will be used.</li>
<li>Use bolts or clamps to secure the vise firmly in place, ensuring stability during machining operations. </li>
</ul>
</li>
<li>
Aligning the Vise: 
<ul>
<li>Adjust the vise along the X-axis and Y-axis to position it correctly relative to the machine's spindle or cutting tool.</li>
<li>Use the machine's built-in alignment features, such as alignment slots or reference marks, to ensure accurate positioning. </li>
</ul>
</li>
<li>
Inserting the Workpiece: 
<ul>
<li>Open the vise jaws wide enough to accommodate the workpiece.</li>
<li>Place the workpiece securely between the vise jaws, ensuring that it is centered and aligned properly for the machining operation. </li>
</ul>
</li>
<li>
Clamping the Workpiece: 
<ul>
<li>Use the vise's clamping mechanism to tighten the jaws securely around the workpiece.</li>
<li>Apply firm, even pressure to ensure that the workpiece is held firmly in place and will not move during machining. </li>
</ul>
</li>
<li>
Adjusting the Vise: 
<ul>
<li>Utilize the vise's three-axis movement capabilities to position the workpiece precisely for the machining operation.</li>
<li>Adjust the vise along the X-axis, Y-axis, and Z-axis as needed to align the cutting tool with the desired machining location on the workpiece. </li>
</ul>
</li>
<li>
Performing the Machining Operation: 
<ul>
<li>Turn on the drill press or milling machine and adjust the speed and feed settings according to the material and cutting tool being used.</li>
<li>Carefully lower the spindle or cutting tool onto the workpiece, ensuring that it is aligned properly for the machining operation.</li>
<li>Begin the drilling, milling, or grinding operation, taking care to maintain steady feed and pressure to achieve the desired results. </li>
</ul>
</li>
<li>
Inspecting and Finishing: 
<ul>
<li>Once the machining operation is complete, inspect the workpiece for any defects or imperfections.</li>
<li>If necessary, perform any additional finishing operations, such as deburring or surface smoothing, to achieve the desired final product. </li>
</ul>
</li>
<li>
Removing the Workpiece: 
<ul>
<li>After machining is complete and the workpiece has cooled if necessary, release the vise's clamping mechanism and remove the workpiece from the vise.</li>
<li>Clean the vise jaws and machine table to remove any debris or coolant residue. </li>
</ul>
</li>
<li>
Shutdown and Maintenance: 
<ul>
<li>Turn off the drill press or milling machine and clean any chips or debris from the work area.</li>
<li>Inspect the vise for any signs of wear or damage, and perform any necessary maintenance or lubrication to ensure continued performance.</li>
</ul>
</li>
</ol>
&nbsp;

How to Use

<ul>
<li>This Vice is equipped with convenient unigrip mechanism.</li>
<li>Spindle moves inside the hollow hand grip allowing the vice to be used at location away from the table edge.</li>
<li>The 3-Way vice is available with 3 mounting options.</li>
<li>The ability to adjust the vise along these three axes provides greater flexibility and precision in positioning the workpiece for machining.</li>
<li>It allows machinists to accurately align the workpiece with the cutting tool or spindle, ensuring precise drilling, milling, or grinding operations.</li>
</ul>

Cat. No.		Jaw Width		JAW OPENING		JAW DEPTH	..
	Inch	mm	Inch	mm	Inch	mm	INCH
GPV-0122	4	100	4	95	3-3/4	30	1-1/5
GPV-0125	3	80	3	80	3	30	1-1/5

VICES & MILLING TABLES

DRILL PRESS VICES

DRILL PRESS VICE 3 WAY

Related Products